P1158 Air/Fuel Ratio Sensor 1 Terminal Low Voltage
What does P1158 mean on a Honda?
P1158. Air/Fuel Ratio Sensor 1 Terminal Low Voltage. This Honda-enhanced code applies to Civic, Accord, CR-V with wideband A/F sensors.
Common causes of P1158
- Aging air/fuel ratio sensor 1 with a failing low-side terminal
- Corroded or loose A/F sensor 1 connector raising terminal resistance
- Exhaust leak ahead of the sensor diluting the exhaust sample
- Open or shorted low-voltage signal wire to the ECM
- Failing ECM sensor reference circuit
How to fix P1158
- Confirm freeze frame data and A/F sensor voltage with a Honda HDS scan tool
- Smoke test the exhaust manifold and downpipe for leaks first
- Backprobe the sensor terminals and compare voltages against service manual spec
- Inspect the connector pins for corrosion, spread terminals, and water intrusion
- Replace air/fuel ratio sensor 1 with an NTK/OE equivalent after excluding leaks and wiring faults
Sources and review
- Last updated 2026-09-07.