P1305 The powertrain control module saw misfire in cylinder 5
This fault is part of the Honda misfire codes guide. It covers the system and the order to check it.
What does P1305 mean on a Honda?
P1305. The powertrain control module saw misfire in cylinder 5. The engine may run rough, shake at idle, or lose power.. This Honda-enhanced code applies to Honda and Acura models that use this code.
Common causes of P1305
- Spark plug or ignition coil misfiring on cylinder 5
- Dirty cylinder 5 fuel injector
- Vacuum leak near cylinder 5
- Low compression on cylinder 5
- Faulty spark voltage detection module
How to fix P1305
- Confirm the code and check for other misfire codes
- Inspect the spark plug and coil on cylinder 5
- Check fuel pressure and the cylinder 5 injector
- Check for vacuum leaks and mechanical condition on cylinder 5
- Repair the cause found
- Clear the code and retest
Sources and review
- Checked against two independent sources.
- Last updated 2026-10-10.