What causes P1382 on a Honda?

Failed cylinder position sensor Open CYP signal wire to the ECM Seized or excessively worn distributor Corroded ECM connectors on older Hondas

How do I fix P1382 on a Honda?

Confirm absent CYP signal during cranking on an HDS scan tool Measure CYP sensor resistance and check wiring to the ECM Inspect the distributor for seizure, shaft play, or internal corrosion Replace the CYP sensor or distributor assembly once the circuit checks out Clear codes and verify CYP sync at idle

P1382 Cylinder Position Sensor No Signal

Q: What does P1382 mean on a Honda?

P1382 — Cylinder Position Sensor No Signal. Applies to Civic, Accord, Odyssey, Prelude.

Category: Powertrain - Ignition
Severity: Check Engine Light
Applies to: Civic, Accord, Odyssey, Prelude

What does P1382 mean on a Honda?

P1382 — Cylinder Position Sensor No Signal. This Honda-enhanced code applies to Civic, Accord, Odyssey, Prelude.

Common causes of P1382

Failed cylinder position sensor
Open CYP signal wire to the ECM
Seized or excessively worn distributor
Corroded ECM connectors on older Hondas

How to fix P1382

Confirm absent CYP signal during cranking on an HDS scan tool
Measure CYP sensor resistance and check wiring to the ECM
Inspect the distributor for seizure, shaft play, or internal corrosion
Replace the CYP sensor or distributor assembly once the circuit checks out
Clear codes and verify CYP sync at idle