P1630 Transmission Control Module Processor Error
What does P1630 mean on a Honda?
P1630 — Transmission Control Module Processor Error. This Honda-enhanced code applies to Accord, Odyssey, Pilot with automatic transmission.
Common causes of P1630
- Internal TCM processor failure
- Voltage spike from a failing alternator damaging the TCM
- Water intrusion at the TCM or its connectors
- Chafed transmission harness shorting into TCM circuits
- Low system voltage during cranking triggering a false processor fault
How to fix P1630
- Clear the code and recheck since low voltage can set it spuriously
- Verify charging system output and battery condition
- Inspect TCM connectors for moisture and corrosion
- Check the transmission harness for chafing at the case pass-through
- Replace the TCM only if the code returns with power and wiring proven good